|Home||» Products||» Base Station Radio||» KENWOOD TK-7180|
Where used below, MASTER is the radio that has the programmed data, SLAVE will be copied from the MASTER and any programming already stored on the SLAVE will be over-written.
To CLONE programmed data between radios the frequency version must be the same
i.e. a 450 - 490 MHz radio can program another 450 - 490 MHz radio but cannot program a 400 - 430 MHz radio etc.
Clone mode needs to be enabled for this to work, see the PC software for details.
- TK-7180 can be MASTER to TK-7180, TK-7189.
- TK-8180 can be MASTER to TK-8180, TK-8189.
These radios cannot be cloned if the "over write password" is programmed to the SLAVE (I do not currently have instructions for how to enter/disable/remove this password but this may be achieved using the correct software and connecting the radio to a PC).